Cupboard or Drawer Lock
Ref. #11-49

1 Available
Price: $10.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Cupboard or Drawer Lock is used on a Cupboard door or on a drawer .   It is mounted on the inside of a cupboard or a drawer, facing (as pictured) to the outside, and  a hole is cut thru to match the keyhole. It measures 2 3/4" x 2 7/8" . This lock is  mortised into the drawer or cupboard (2 1/2" x 1 1/4" x 3/8"). and is keyed, restored and ready to be installed.

Early Drawer Lock
Ref. #11-53

1 Available
Price: $28.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Early Wrought Iron Drawer Lock is  mortised (2" x 2 1/4" x 3/8") on the inside of the chest,  facing (as pictured) to the outside of the chest.  A hole is cut to match the keyhole. The Lock measures 3 1/4" x 2 7/8" and is keyed, restored and ready to be installed.

Cupboard or Drawer Lock
Ref. #11-5C

3 Available
Price: $9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

Cupboard or Drawer Locks are used on a Cupboard door  or on a drawer.   They are mounted on the inside of a cupboard or a drawer, facing (as pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is  5/8" from top of lock to the pin, 5/8" from right side to pin and 1" from left to pin.  It measures 1 5/8" from bolt edge to round edge x 1 3/4" wide. This lock must be installed in a dovetailed mortise (1 3/4" x 1 1/8" x 3/8"). The key handle may vary,  restored and ready to be installed.

Drawer Lock
Ref. #11-52

2 Available
$9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Drawer Lock, it is mortised (1 3/8" x 1 1/2" x 1/4") on the inside of the  drawer and a hole is cut in the drawer to match the key hole.  The lock measures 1 3/4" x 2 1/2" and it is keyed  restored and ready to be installed.  The key handle may vary.

Drawer Lock
Ref. #11-93

1 Available
$9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Drawer Lock, it is mortised (1 1/8" x 1" x 3/8") on the inside of the  drawer and a hole is cut 5/8" down from the top in the drawer to match the key hole center.  The lock measures 1 3/8" x 2" and it is reversible. Restored with key and ready to be installed.