Chest Lock
Ref. #11-1

10 Available
Price: $25.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Locks are used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (2" x 1 5/8" x 3/8") on the inside of the chest,  facing (as pictured) to the outside of the chest.  A hole is cut to match the keyhole center 3/4" from the top edge of the lock. The Lock measures 1 3/4" x 3" and is keyed, restored and ready to be installed.

Cupboard or Drawer Lock
Ref. #11-5

6 Available
Price: $9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

Cupboard or Drawer Locks are used on a Cupboard door as shown in the first position or on a drawer as shown in second position.   They are mounted on the inside of a cupboard or a drawer, facing (as pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is  5/8" from top of lock to the pin, 5/8" from left side to pin and 1" from right to pin.  It measures 1 5/8" from bolt edge to round edge x 1 3/4" wide. This lock must be installed in a dovetailed mortise (1 3/4" x 1 1/8" x 3/8"). The key handle may vary,  restored and ready to be installed.

Cabinet or Drawer Lock
Ref. #11-118

2 Available
$9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Cabinet or drawer Lock measures 1 1/2" x 2 1/8"  It is mortised (1 1/8" x 1 1/8" x 5/16") and  on the inside of the cabinet door or drawer.  A hole is cut thru to match the keyhole and it measures from the hole center to the top edge  7/8" .   Restored with key and ready to be installed. Key handle may vary

Cabinet or Drawer Lock
Ref. #11-65

9 Available
$10.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Corbin cabinet or drawer lock, it is mounted on the inside of a cabinet door or a drawer. A hole is cut in the door or drawer to match the key hole and the hole center from the edge measures 3/4".  The lock measures 1 1/4" x 2 3/8" and it is reversible. Restored with key and ready to be installed.